The parts of your trash compactor that should be cleaner regularly are those
that come into contact with trash the most frequently. This includes the ram,
which is what presses the garbage down into the bag, and the container that
holds the bag, which may become torn and leak onto the container. Cleaning both
of these parts regularly will eliminate odors and keep mold from growing on and
in your appliance.
Things You'll Need:
• Water and dish soap (or all-purpose cleaner) Rubber gloves Wet/dry vacuum
Rag or sponge Antibacterial cleaner (or 1/4 to 1/2 cup bleach and 1 gallon
water) Bleach
Step 1
Use an all-purpose cleaner or water and dish soap to wipe down (with a rag or
sponge) the front of the machine. If it is stainless steel, consider using a
cleaner made specifically for that material.
Step 2
Put on rubber gloves before cleaning the compactor's interior for hygiene and
to avoid being cut by loose shards of glass or metal parts.
Step 3
Pull out the drawer and use a wet/dry vacuum to suck out any loose glass,
metal or other debris.
Step 4
Spray an antibacterial cleaner onto the interior surface of your trash
compactor's container (where the bag goes) and the ram, the flat part that
pushes down the garbage. Though available at drug, grocery and hardware stores,
antibacterial cleaner can also be made at home with water and a bit of bleach.
Mix 1/4 to 1/2 cup bleach per gallon of water; wipe it on with a sponge or
rag.
Step 5
Allow the areas to air-dry before putting in a fresh trash bag and closing
the drawer.
• Spray the inside of your trash compactor with a disinfectant between
cleanings to discourage bacteria from growing. If your compactor has a filter,
replace it once or twice a year.
.jpg)
.jpg)
